PROJECT SITE FACILITIES

 

Office Units and Living Quarters

International Housing Projects which are away from Urban areas will need some sort of project-site housing for the workers such as office space, sleeping facilities, baths and toilets, first aid shelters, etc. We have prepared standard and panelized units to meet these needs. These buildings can be shipped in 70% completed status and can be put up on concrete blocks in one day. See below for designs and pricing. These units are transportable and can be resold to other projects when no longer needed.
 

Click on images to enlarge
JOB-SITE OFFICES AND SLEEPING FACILITIES

260 sq ft, Engineer/ Supervisor

260 sq ft, Team Leaders, 4 persons

143  sq ft, Workers, 6 persons

 

JOB-SITE SERVICE BUILDINGS
260 sq ft, First Aid Clinic 440 sq ft, Dining Area 440 sq ft, Cooking and Service Area
Priced to order specifications Priced to order specifications Priced to order specifications

 
JOB-SITE SERVICE BUILDINGS (con't)
342 sq ft, Bathrooms and Toilets/ Women 342 sq ft, Bathrooms and Toilets/ Men

In Development
 
In Development
 
Priced to order specifications Priced to order specifications
 
Materials

Light gauge galvanized rust proof steel framing system: Structural light gauge steel framing components for roof trusses and wall systems.  All wall studs and tracks, clips, angles, roof hat channels, soffit framing, fascia plates, lateral bracing and required fasteners.

American shingle MONO-SLOPE roofing system: OSB Sub-roofing panels, 15 lbs vapor barrier felt liner, aluminum valley flashings, drip edges to prevent rotting, attic ventilation windows all the required fasteners.

EXTERIOR WALLS: Non-combustible fiber cement panels, fiber cement joint and corner trim, necessary caulking sealers and fasteners.

INTERIOR WALLS: Sheet rock panels, joint tapes, corner beads, plaster and base boards

FLOORING: Steel frame joists, wood flooring,

DOORS AND WINDOWS: Steel front door with foam core, doorframe, dead lock and keys. Back door where ever applicable. Sliding Vinyl or aluminum windows with screens.
 FIXTURES AND APPLIANCES: Complete electrical wiring and lighting, complete plumbing, 38 x 38 shower enclosure, shower controls, shower curtain, commode with seat and seat cover, wall-hung sink, faucet, vinyl flooring, kitchen countertop, electrical cook top, kitchen sink, and kitchen faucet. Kitchen refrigerator is optional: additional fees apply.
 HEATING, VENTILATION, AND AIR CONDITIONING (HVAC): This is an option: if required, additional charges will apply. Plug-in heating or air conditioning unit or combination unit.
 FURNITURE: Bunk bed, futon (couch/bed combination), closet or locker, work/dining table, 2 chairs, mattress, 2 sets of sheets per bed, 2 pillows with covers per bed, 1 light cover sheet with blanket,  
  
DORMITORY FACILITIES
  2400 Sq Ft ( 222.97m)
Dormitory Block, houses 16 to 32 people
600 Sq Ft (55.74m)
Dormitory Section
Houses 4-8 people
Flexible to flip and repeat to build a multi-section, multi-floor
student housing

  Flexible to build multi-section, multi-block, multi-floor student housing

 
Additional Possibilities with the student or labor dormitories:

  1. If needed, bunk beds can be used to sleep two persons in each room.

  2. Each 4-room section can be repeated in symmetrical formats creating multi section housing blocks with hallways in between. This can be built as many times as wished providing land is available.

  3. Additional blocks can be added on top of the ground floor blocks. However this will require for the first floor to utilize additional steel and extra steel will be needed for the hallways and floor joists.

  4. These designs with a small modification can be built as hospital rooms, factory guesthouses, and church guesthouses and as multi person housing building wherever needed.
     
Materials for student or worker dormitories

Light gauge galvanized rust proof steel framing system: Structural light gauge steel framing components for roof trusses and wall systems.  All wall studs and tracks, clips, angles, roof hat channels, soffit framing, fascia plates, lateral bracing and required fasteners.

American shingle GABLE roofing system: OSB Sub-roofing panels, 15 lbs vapor barrier felt liner, aluminum valley flashings, drip edges to prevent rotting, attic ventilation windows all the required fasteners.

EXTERIOR WALLS: Non-combustible fiber cement panels, fiber cement joint and corner trim, necessary caulking sealers and fasteners.

INTERIOR WALLS: Sheet rock panels, joint tapes, corner beads, plaster and base boards

FLOORING: Steel frame joists, wood or concrete sub flooring.

DOORS AND WINDOWS: Solid core wood or steel front door with foam core, doorframe, dead lock and keys. Hallow core wood interior doors wherever applicable. Sliding Vinyl or aluminum windows with screens, closet doors.
FIXTURES AND APPLIANCES: Complete electrical wiring and lighting, complete plumbing, 38 x 38 shower enclosure, shower controls, shower curtain, commode with seat and seat cover, wall-hung sink, faucet, vinyl flooring, kitchen countertop, electrical cook top, kitchen sink, and kitchen faucet. (Kitchen refrigerator, stackable washer and drier is optional: additional fees apply)
HEATING, VENTILATION, AND AIR CONDITIONING (HVAC): This is an option: if required, additional charges will apply. Plug-in heating or air conditioning unit or combination unit per room.
FURNITURE: (Based on the final design and final selection of furniture pieces; quantities thus prices may slightly vary) Standard bed frame or bunk bed frame, futon (couch/bed combination), closet or locker, 1 or 2 work desk, 1 or 2 chairs, mattress(es), 2 sets of sheets per bed, 2 pillows with covers per bed, 1 light cover sheet with blanket.
 
For a discussion with the specialist in charge of your market area call +1(678) 382-0335


SteelFrameHousing.us®  |  PHONE: 1  (678) 382-0335  |  FAX:  1 (678) 382-3710  |  Updated DECEMBER 24TH, 2005